AspNetCore.Docs/aspnetcore/fundamentals/servers/httpsys.md

title	author	description	monikerRange	ms.author	ms.custom	ms.date	uid
HTTP.sys web server implementation in ASP.NET Core	tdykstra	Learn about HTTP.sys, a web server for ASP.NET Core on Windows. Built on the HTTP.sys kernel-mode driver, HTTP.sys is an alternative to Kestrel that can be used for direct connection to the Internet without IIS.	>= aspnetcore-2.1	tdykstra	mvc	10/30/2023	fundamentals/servers/httpsys

HTTP.sys web server implementation in ASP.NET Core

[!INCLUDE]

By Tom Dykstra and Chris Ross

:::moniker range=">= aspnetcore-8.0"

HTTP.sys is a web server for ASP.NET Core that only runs on Windows. HTTP.sys is an alternative to Kestrel server and offers some features that Kestrel doesn't provide.

[!IMPORTANT] HTTP.sys isn't compatible with the ASP.NET Core Module and can't be used with IIS or IIS Express.

HTTP.sys supports the following features:

• Windows Authentication
• Port sharing
• HTTPS with SNI
• HTTP/2 over TLS (Windows 10 or later)
• Direct file transmission
• Response caching
• WebSockets (Windows 8 or later)

Supported Windows versions:

• Windows 7 or later
• Windows Server 2008 R2 or later

View or download sample code (how to download)

When to use HTTP.sys

HTTP.sys is useful for deployments where:

• There's a need to expose the server directly to the Internet without using IIS.

  

• An internal deployment requires a feature not available in Kestrel. For more information, see Kestrel vs. HTTP.sys

  

HTTP.sys is mature technology that protects against many types of attacks and provides the robustness, security, and scalability of a full-featured web server. IIS itself runs as an HTTP listener on top of HTTP.sys.

HTTP/2 support

HTTP/2 is enabled for ASP.NET Core apps when the following base requirements are met:

• Windows Server 2016/Windows 10 or later
• Application-Layer Protocol Negotiation (ALPN) connection
• TLS 1.2 or later connection

If an HTTP/2 connection is established, HttpRequest.Protocol reports HTTP/2.

HTTP/2 is enabled by default. If an HTTP/2 connection isn't established, the connection falls back to HTTP/1.1. In a future release of Windows, HTTP/2 configuration flags will be available, including the ability to disable HTTP/2 with HTTP.sys.

HTTP/3 support

HTTP/3 is enabled for ASP.NET Core apps when the following base requirements are met:

• Windows Server 2022/Windows 11 or later
• An https url binding is used.
• The EnableHttp3 registry key is set.

The preceding Windows 11 Build versions may require the use of a Windows Insider build.

HTTP/3 is discovered as an upgrade from HTTP/1.1 or HTTP/2 via the alt-svc header. That means the first request will normally use HTTP/1.1 or HTTP/2 before switching to HTTP/3. Http.Sys doesn't automatically add the alt-svc header, it must be added by the application. The following code is a middleware example that adds the alt-svc response header.

app.Use((context, next) =>
{
    context.Response.Headers.AltSvc = "h3=\":443\"";
    return next(context);
});

Place the preceding code early in the request pipeline.

Http.Sys also supports sending an AltSvc HTTP/2 protocol message rather than a response header to notify the client that HTTP/3 is available. See the EnableAltSvc registry key. This requires netsh sslcert bindings that use host names rather than IP addresses.

Kernel mode authentication with Kerberos

HTTP.sys delegates to kernel mode authentication with the Kerberos authentication protocol. User mode authentication isn't supported with Kerberos and HTTP.sys. The machine account must be used to decrypt the Kerberos token/ticket that's obtained from Active Directory and forwarded by the client to the server to authenticate the user. Register the Service Principal Name (SPN) for the host, not the user of the app.

Support for kernel-mode response buffering

In some scenarios, high volumes of small writes with high latency can cause significant performance impact to HTTP.sys. This impact is due to the lack of a xref:System.IO.Pipelines.Pipe buffer in the HTTP.sys implementation. To improve performance in these scenarios, support for response buffering is included in HTTP.sys. Enable buffering by setting HttpSysOptions.EnableKernelResponseBuffering to true.

Response buffering should be enabled by an app that does synchronous I/O, or asynchronous I/O with no more than one outstanding write at a time. In these scenarios, response buffering can significantly improve throughput over high-latency connections.

Apps that use asynchronous I/O and that may have more than one write outstanding at a time should not use this flag. Enabling this flag can result in higher CPU and memory usage by HTTP.Sys.

How to use HTTP.sys

Configure the ASP.NET Core app to use HTTP.sys

Call the xref:Microsoft.AspNetCore.Hosting.WebHostBuilderHttpSysExtensions.UseHttpSys%2A extension method when building the host, specifying any required xref:Microsoft.AspNetCore.Server.HttpSys.HttpSysOptions. The following example sets options to their default values:

:::code language="csharp" source="~/fundamentals/servers/httpsys/samples/8.x/SampleApp/Program.cs" id="snippet_1" highlight="8-16":::

Additional HTTP.sys configuration is handled through registry settings.

For more information about HTTP.sys options, see xref:Microsoft.AspNetCore.Server.HttpSys.HttpSysOptions.

MaxRequestBodySize

The maximum allowed size of any request body in bytes. When set to null, the maximum request body size is unlimited. This limit has no effect on upgraded connections, which are always unlimited.

The recommended method to override the limit in an ASP.NET Core MVC app for a single IActionResult is to use the xref:Microsoft.AspNetCore.Mvc.RequestSizeLimitAttribute attribute on an action method:

[RequestSizeLimit(100000000)]
public IActionResult MyActionMethod()

An exception is thrown if the app attempts to configure the limit on a request after the app has started reading the request. An IsReadOnly property can be used to indicate if the MaxRequestBodySize property is in a read-only state, meaning it's too late to configure the limit.

If the app should override xref:Microsoft.AspNetCore.Server.HttpSys.HttpSysOptions.MaxRequestBodySize per-request, use the xref:Microsoft.AspNetCore.Http.Features.IHttpMaxRequestBodySizeFeature:

:::code language="csharp" source="~/fundamentals/servers/httpsys/samples/8.x/SampleApp/Program.cs" id="snippet_12" highlight="3-4":::

If using Visual Studio, make sure the app isn't configured to run IIS or IIS Express.

In Visual Studio, the default launch profile is for IIS Express. To run the project as a console app, manually change the selected profile, as shown in the following screenshot:

:::image type="content" source="~/fundamentals/servers/httpsys/_static/vs-choose-profile.png" alt-text="Select console app profile":::

Configure Windows Server

1. Determine the ports to open for the app and use Windows Firewall or the New-NetFirewallRule PowerShell cmdlet to open firewall ports to allow traffic to reach HTTP.sys. In the following commands and app configuration, port 443 is used.

2. When deploying to an Azure VM, open the ports in the Network Security Group. In the following commands and app configuration, port 443 is used.

3. Obtain and install X.509 certificates, if required.

   On Windows, create self-signed certificates using the New-SelfSignedCertificate PowerShell cmdlet. For an unsupported example, see UpdateIISExpressSSLForChrome.ps1.

   Install either self-signed or CA-signed certificates in the server's Local Machine > Personal store.

4. If the app is a framework-dependent deployment, install .NET Core, .NET Framework, or both (if the app is a .NET Core app targeting the .NET Framework).

   • .NET Core: If the app requires .NET Core, obtain and run the .NET Core Runtime installer from .NET Core Downloads. Don't install the full SDK on the server.
   • .NET Framework: If the app requires .NET Framework, see the .NET Framework installation guide. Install the required .NET Framework. The installer for the latest .NET Framework is available from the .NET Core Downloads page.

   If the app is a self-contained deployment, the app includes the runtime in its deployment. No framework installation is required on the server.

5. Configure URLs and ports in the app.

   By default, ASP.NET Core binds to http://localhost:5000. To configure URL prefixes and ports, options include:

   • xref:Microsoft.AspNetCore.Hosting.HostingAbstractionsWebHostBuilderExtensions.UseUrls*
   • urls command-line argument
   • ASPNETCORE_URLS environment variable
   • xref:Microsoft.AspNetCore.Server.HttpSys.HttpSysOptions.UrlPrefixes

   The following code example shows how to use xref:Microsoft.AspNetCore.Server.HttpSys.HttpSysOptions.UrlPrefixes with the server's local IP address 10.0.0.4 on port 443:

   :::code language="csharp" source="~/fundamentals/servers/httpsys/samples/8.x/SampleApp/Program.cs" id="snippet_11" highlight="5":::

   An advantage of UrlPrefixes is that an error message is generated immediately for improperly formatted prefixes.

   The settings in UrlPrefixes override UseUrls/urls/ASPNETCORE_URLS settings. Therefore, an advantage of UseUrls, urls, and the ASPNETCORE_URLS environment variable is that it's easier to switch between Kestrel and HTTP.sys.

   HTTP.sys recognizes two types of wild cards in URL prefixes:

   • * is a weak binding, also known as a fallback binding. If the URL prefix is http://*:5000, and something else is bound to port 5000, this binding won't be used.
   • + is a strong binding. If the URL prefix is http://+:5000, this binding will be used before other port 5000 bindings.

   For more information, see UrlPrefix Strings.

   [!WARNING] Top-level wildcard bindings (http://*:80/ and http://+:80) should not be used. Top-level wildcard bindings create app security vulnerabilities. This applies to both strong and weak wildcards. Use explicit host names or IP addresses rather than wildcards. Subdomain wildcard binding (for example, *.mysub.com) isn't a security risk if you control the entire parent domain (as opposed to *.com, which is vulnerable). For more information, see RFC 9110: Section 7.2: Host and :authority.

   [!INCLUDE http-ports]

   These configuration keys are equivalent to top-level wildcard bindings. They're convenient for development and container scenarios, but avoid wildcards when running on a machine that may also host other services.

6. Preregister URL prefixes on the server.

   The built-in tool for configuring HTTP.sys is netsh.exe. netsh.exe is used to reserve URL prefixes and assign X.509 certificates. The tool requires administrator privileges.

   Use the netsh.exe tool to register URLs for the app:

   netsh http add urlacl url=<URL> user=<USER>
   

   • <URL>: The fully qualified Uniform Resource Locator (URL). Don't use a wildcard binding. Use a valid hostname or local IP address. The URL must include a trailing slash.
   • <USER>: Specifies the user or user-group name.

   In the following example, the local IP address of the server is 10.0.0.4:

   netsh http add urlacl url=https://10.0.0.4:443/ user=Users
   

   When a URL is registered, the tool responds with URL reservation successfully added.

   To delete a registered URL, use the delete urlacl command:

   netsh http delete urlacl url=<URL>
   

7. Register X.509 certificates on the server.

   Use the netsh.exe tool to register certificates for the app:

   netsh http add sslcert ipport=<IP>:<PORT> certhash=<THUMBPRINT> appid="{<GUID>}"
   

   • <IP>: Specifies the local IP address for the binding. Don't use a wildcard binding. Use a valid IP address.
   • <PORT>: Specifies the port for the binding.
   • <THUMBPRINT>: The X.509 certificate thumbprint.
   • <GUID>: A developer-generated GUID to represent the app for informational purposes.

   For reference purposes, store the GUID in the app as a package tag:

   • In Visual Studio:
     • Open the app's project properties by right-clicking on the app in Solution Explorer and selecting Properties.
     • Select the Package tab.
     • Enter the GUID that you created in the Tags field.
   • When not using Visual Studio:

     • Open the app's project file.

     • Add a <PackageTags> property to a new or existing <PropertyGroup> with the GUID that you created:

       <PropertyGroup>
         <PackageTags>9412ee86-c21b-4eb8-bd89-f650fbf44931</PackageTags>
       </PropertyGroup>
       

   In the following example:

   • The local IP address of the server is 10.0.0.4.
   • An online random GUID generator provides the appid value.

   netsh http add sslcert 
       ipport=10.0.0.4:443 
       certhash=b66ee04419d4ee37464ab8785ff02449980eae10 
       appid="{9412ee86-c21b-4eb8-bd89-f650fbf44931}"
   

   When a certificate is registered, the tool responds with SSL Certificate successfully added.

   To delete a certificate registration, use the delete sslcert command:

   netsh http delete sslcert ipport=<IP>:<PORT>
   

   Reference documentation for netsh.exe:

   • Netsh Commands for Hypertext Transfer Protocol (HTTP)
   • UrlPrefix Strings

8. Run the app.

   Administrator privileges aren't required to run the app when binding to localhost using HTTP (not HTTPS) with a port number greater than 1024. For other configurations (for example, using a local IP address or binding to port 443), run the app with administrator privileges.

   The app responds at the server's public IP address. In this example, the server is reached from the Internet at its public IP address of 104.214.79.47.

   A development certificate is used in this example. The page loads securely after bypassing the browser's untrusted certificate warning.

   

Proxy server and load balancer scenarios

For apps hosted by HTTP.sys that interact with requests from the Internet or a corporate network, additional configuration might be required when hosting behind proxy servers and load balancers. For more information, see Configure ASP.NET Core to work with proxy servers and load balancers.

Get detailed timing information with IHttpSysRequestTimingFeature

IHttpSysRequestTimingFeature provides detailed timing information for requests:

• Timestamps are obtained using QueryPerformanceCounter.
• The timestamp frequency can be obtained via QueryPerformanceFrequency.
• The index of the timing can be cast to HttpSysRequestTimingType to know what the timing represents.
• The value may be 0 if the timing isn't available for the current request.
• Requires Windows 10 version 2004, Windows Server 2022, or later.

:::code language="csharp" source="~/fundamentals/request-features/samples/8.x/IHttpSysRequestTimingFeature/Program.cs" id="snippet_WithTimestamps":::

IHttpSysRequestTimingFeature.TryGetTimestamp retrieves the timestamp for the provided timing type:

:::code language="csharp" source="~/fundamentals/request-features/samples/8.x/IHttpSysRequestTimingFeature/Program.cs" id="snippet_WithTryGetTimestamp":::

IHttpSysRequestTimingFeature.TryGetElapsedTime gives the elapsed time between two specified timings:

:::code language="csharp" source="~/fundamentals/request-features/samples/8.x/IHttpSysRequestTimingFeature/Program.cs" id="snippet_WithTryGetElapsedTime":::

Advanced HTTP/2 features to support gRPC

Additional HTTP/2 features in HTTP.sys support gRPC, including support for response trailers and sending reset frames.

Requirements to run gRPC with HTTP.sys:

• Windows 11 Build 22000 or later, Windows Server 2022 Build 20348 or later.
• TLS 1.2 or later connection.

Trailers

[!INCLUDE]

Reset

[!INCLUDE]

Tracing

For information about how to get traces from HTTP.sys, see HTTP.sys Manageability Scenarios.

Additional resources

• Enable Windows Authentication with HTTP.sys
• HTTP Server API
• aspnet/HttpSysServer GitHub repository (source code)
• The host
• xref:test/troubleshoot

:::moniker-end

[!INCLUDE httpsys5-7]