Benchmarker should pass exec flags (e.g. --no-crankshaft,
--turbofan-filter, --trace-opt etc) to the benchmarking process
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
PR-URL: https://github.com/iojs/io.js/pull/928
Some of the benchmarks that were added in commit 847b9d2 complete too
quickly to draw meaningful conclusions from. Increase the number of
iterations to make them run longer.
PR-URL: https://github.com/iojs/io.js/pull/746
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Before this commit, only benchmark targets defined in Makefile could
be used. This commit allows execution of common.js directly and
passing of filter arguments directly, allowing you to run either a
subset of benchmarks or a single specific benchmark for comparison.
PR-URL: https://github.com/iojs/io.js/pull/711
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
When running benchmark/compare.js, it is typical to run a version of
node that does not support template strings. This provides backwards
compatibility for comparing benchmarks using older versions of node.
PR-URL: https://github.com/iojs/io.js/pull/714
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
This commit cleans up `benchmark/common.js` with a few generic changes
such as the following:
- declare all `require()`'d libraries at the top instead of in the
middle
- add some empty whitespace where it helps readability
- changes ambiguous variable names
- standardizes most if / else blocks
- missing semicolons
PR-URL: https://github.com/iojs/io.js/pull/662
Reviewed-By: Nicu Micleușanu <micnic90@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Stephen Belanger <admin@stephenbelanger.com>
This commit removes the benchmark spacing modification in
`client-request-body.js` and `end-vs-write-end.js` which adds two spaces
to the end of some variables to make sure the lines line up.
The reason behind this is that its totally pointless (the lines don't
actually line up with it) and it disallows you to parse the output with
a tool like awk, or at least makes it a lot harder.
PR-URL: https://github.com/iojs/io.js/pull/650
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Adds info on the `wrk` prerequisite for http benchmarks and how to
run benchmarks with options.
PR-URL: https://github.com/iojs/io.js/pull/629
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Evan Lucas <evanlucas@me.com>
This makes possible to use `for..of` loop with
buffers. Also related `keys`, `values` and `entries`
methods are added for feature parity with `Uint8Array`.
PR-URL: https://github.com/iojs/io.js/pull/525
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Fix up the tcp raw benchmarks after an internal API change.
PR-URL: https://github.com/iojs/io.js/pull/495
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
deps/v8/benchmarks/regexp.js clobbers the RegExp global, breaking
util.format() and console.log(). Unclobber it to keep the other
benchmarks working.
Fixes the following error when running benchmark/misc/v8-bench.js:
$ out/Release/iojs benchmark/misc/v8-bench.js
util.js:84
if (new RegExp('\\b' + set + '\\b', 'i').test(debugEnviron)) {
^
TypeError: object is not a function
at Object.exports.debuglog (util.js:84:9)
at timers.js:12:29
at NativeModule.compile (node.js:800:5)
at NativeModule.require (node.js:769:18)
at net.js:5:14
at NativeModule.compile (node.js:800:5)
at NativeModule.require (node.js:769:18)
at tty.js:4:11
at NativeModule.compile (node.js:800:5)
at Function.NativeModule.require (node.js:769:18)
This could alternatively be addressed by caching the RegExp global
in lib/util.js. That's not a bad approach and I considered it but
doing it for just RegExp and not other globals would be half-baked.
Maybe the more thorough approach where we cache all globals at
start-up is something for a follow-up pull request.
Fixes: https://github.com/iojs/io.js/pull/475
PR-URL: https://github.com/iojs/io.js/pull/489
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Yosuke Furukawa <yosuke.furukawa@gmail.com>
Before:
# common.js executes all tests in net directory.
$ ./iojs common.js net
After:
# common.js executes only "dgram" tests in net directory.
$ ./iojs common.js net dgram
PR-URL: https://github.com/iojs/io.js/pull/488
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The copyright and license notice is already in the LICENSE file. There
is no justifiable reason to also require that it be included in every
file, since the individual files are not individually distributed except
as part of the entire package.
Replace the call to Array#splice() with a faster open-coded version
that creates less garbage.
Add a new benchmark to prove it. With the change applied, it scores
about 5% higher and that is nothing to sneeze at.
PR-URL: https://github.com/iojs/io.js/pull/184
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Rename the url.parse() benchmark from url.js to url-parse.js.
A follow-up commit is going to add another one for url.resolve().
PR-URL: https://github.com/iojs/io.js/pull/184
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Replace the call to Array#splice() with a faster open-coded version
that creates less garbage.
Add a new benchmark to prove it. With the change applied, it scores
a whopping 40% higher.
PR-URL: https://github.com/iojs/io.js/pull/185
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Don't use Number#toPrecision(), it switches to scientific notation for
numbers with more digits than the precision; use Number#toFixed().
PR-URL: https://github.com/iojs/io.js/pull/185
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Force V8 to optimize url.parse() before starting the actual benchmark.
Tries to minimize variance between successive runs caused by the
optimizer kicking in at different points.
It does not seem to have much impact, CPU times are roughly the same
before and afterwards; url.parse() quickly plateaus at a local optimum
where most time is spent in V8 builtins, notably Runtime_StringSplit()
and Object::GetElementWithReceiver() calls originating from
deps/v8/src/uri.js, with no recurring optimize/deoptimize cycles that
I could spot.
Still, I don't see any downsides to pre-optimizing the function being
benchmarked so in it goes.
PR-URL: https://github.com/iojs/io.js/pull/132
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Adds the feature to define arguments for the function called in
domain.run(), this is supposed to be useful when a function is called from
another context and some values from the current context are needed as
arguments, it's similar to the callback from setTimeout or setInterval.
PR-URL: https://github.com/iojs/io.js/pull/15
Reviewed-By: Chris Dickinson <christopher.s.dickinson@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Based on the ad-hoc benchmark from joyent/node#8638 plus an additional
benchmark for user:pass auth URLs.
PR-URL: https://github.com/iojs/io.js/pull/102
Reviewed-by: Chris Dickinson <christopher.s.dickinson@gmail.com>
Adds a test for benchmarking the module loader, needed for benchmarking
changes / refacortings in the module loader.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Timothy J Fontaine <tjfontaine@gmail.com>
The test is supposed to measure the performance of the base64 encoder
so move the Buffer#write() calls out of the benchmark section.
The overhead of the calls isn't terrible (about 1-3%) but having
unrelated activity in a micro-benchmark is never a good idea.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
compare() works like String.localeCompare such that:
Buffer.compare(a, b) === a.compare(b);
equals() does a native check to see if two buffers are equal.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Increase the performance and simplify the logic of Buffer#write{U}Int*
and Buffer#read{U}Int* methods by placing the byte manipulation code
directly inline.
Also improve the speed of buffer-write benchmarks by creating a new
call directly to each method by using Function() instead of calling by
buff[fn].
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Since the SlabAllocator was removed the buffer length/offset is no
longer sent to the onread callback. The benchmarks have been updated to
reflect that.
This commit adds an optimization to the HTTP client that makes it
possible to:
* Pack the headers and the first chunk of the request body into a
single write().
* Pack the chunk header and the chunk itself into a single write().
Because only one write() system call is issued instead of several,
the chances of data ending up in a single TCP packet are phenomenally
higher: the benchmark with `type=buf size=32` jumps from 50 req/s to
7,500 req/s, a 150-fold increase.
This commit removes the check from e4b716ef that pushes binary encoded
strings into the slow path. The commit log mentions that:
We were assuming that any string can be concatenated safely to
CRLF. However, for hex, base64, or binary encoded writes, this
is not the case, and results in sending the incorrect response.
For hex and base64 strings that's certainly true but binary strings
are 'das Ding an sich': string.length is the same before and after
decoding.
Fixes#5528.
The benchmark compare would drop the last run of the binary pairs. So
when they were only run once an error would arise because no data was
generated for the second binary.
Petka Antonov
Brian White
Ben Noordhuis
Evan Lucas
Brendan Ashworth
Fishrock123
Vladimir Kurchatkin
Yosuke Furukawa
isaacs
cjihrig
micnic
Robert Kowalski
Raymond Feng
Sean McArthur
Nick Apperson
Timothy J Fontaine
Fedor Indutny
Jackson Tian
Matthew Aynalem
Trevor Norris