The docs for readLine.pause are misleading. I seriously spent hours on this. If
it isn't a bug, at least it should be well documented.
Someone else stumbled on this too:
http://stackoverflow.com/questions/21341050/pausing-readline-in-node-js
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Chris Dickinson <christopher.s.dickinson@gmail.com>
Associates link to dns.lookup() with proper URL.
Fixes: https://github.com/joyent/node/issues/8018
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Chris Dickinson <christopher.s.dickinson@gmail.com>
* `util.inspect` cannot accept es6 symbol primitive
* It will throw exception if do `util.inspect(Symbol())`
* This also affects repl, console.log, etc.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Chris Dickinson <christopher.s.dickinson@gmail.com>
Add generic functions for (U)Int read/write operations on Buffers. These
support up to and including 48 bit reads and writes.
Include documentation and tests.
Additional work done by Trevor Norris to include 40 and 48 bit write
support. Because bitwise operations cannot be used on values greater
than 32 bits, the operations have been replaced with mathematical
calculations. Regardless, they are still faster than floating point
operations.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Performance improvement by moving checks for floating point operations
to JS and doing the operation on a protected internal function that
assumes all arguments are correct. Still abort if the operation
overflows memory. This can only be caused if the Buffer's length
property isn't the same as the actual internal length.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Passing null as the output stream to readline.Interface()'s constructor
is now supported. Any output written by readline is just discarded. It
makes it easier to use readline just as a line parser.
Fixes: https://github.com/joyent/node/issues/4408
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Since we are taking control of the microtask queue it makes sense to
disable autorun and only run microtasks when necessary. Just setting
isolate->SetAutorunMicrotasks(false) would cause _tickCallback() not to
be called.
Automatically running the microtask queue will cause it to run:
* After callback invocation
* Inside _tickCallback()
* After _tickCallback() invocation
The third one is unnecessary as the microtask queue is guaranteed to be
empty at this point. The first only needs to be run manually when
_tickCallback() isn't going to be called by MakeCallback().
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Match the behavior of the slow path by setting url.query to an empty
object when the url contains no query, but query parsing is requested.
Also add a test for this case, and update the documents to clearly
reflect this behavior.
Fixes: https://github.com/joyent/node/issues/8332
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
Running fill() with an empty string would cause Node to hang
indefinitely. Now it will return without having operated on the buffer.
User facing function has been pulled into JS to perform all initial
value checks and coercions. The C++ method has been placed on the
"internal" object.
Coerced non-string values to numbers to match v0.10 support.
Simplified logic and changed a couple variable names.
Added tests for fill() and moved them all to the beginning of
buffer-test.js since many other tests depend on fill() working properly.
Fixes: https://github.com/joyent/node/issues/8469
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
The parameter parser specifically looked for the old bracket syntax.
This generated a lot of warnings when building the docs. Those warnings
have been fixed by changing the parsing logic.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Several fields on OutgoingMessage were set after instantiation. These
have been included in the constructor to prevent mutation of the object
map after instantiation.
"name" is now explicitly checked to be a string. Where before if a
non-string was passed the following cryptic error was thrown:
_http_outgoing.js:334
var key = name.toLowerCase();
^
TypeError: undefined is not a function
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Calls from JS to C++ have an implicit HandleScope. So there is no need
to instantiate a new HandleScope in these basic cases.
Check if the returned int64_t is an SMI and cast the return value to
uint32_t instead of a double. Prevents needing to box the return value,
and saves a small amount of execution time.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Don't allocate any BIO buffers initially, do this on a first read from
the TCP connection. Allocate different amount of data for initial read
and for consequent reads: small buffer for hello+certificate, big buffer
for better throughput.
see #8416
Add stricter argument type checking to normalizeSpawnArguments().
Removes a number of extraneous checks in spawn().
Fix regression in handling of the optional args argument.
Add more thorough testing of spawn() arguments.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Only run lineEnding.test() on the newly acquired chunk of string instead
of on the entire line buffer.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Documentation incorrectly used bracket notation for optional parameters.
This caused inconsistencies in usage because of examples like the
following:
fs.write(fd, data[, position[, encoding]], callback)
This simply fixes all uses of bracket notation in documentation.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
The property server.connections should no longer be enumerable because
it has been deprecated. This will prevent deprecation warnings when
server objects are accessed by functions such as JSON.stringify.
Fixes: https://github.com/joyent/node/issues/8373
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Adds a test for benchmarking the module loader, needed for benchmarking
changes / refacortings in the module loader.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Timothy J Fontaine <tjfontaine@gmail.com>
4c9b30d introduced a regression in buffer.slice that 7c3c51b fixed, but
no test had been added to make sure that a similar regression is caught
by the tests suite in the future.
In 4c9b30d removal of the prototype attributes meant NativeBuffer() no
longer had the same object map as Buffer(). By now setting the same
properties in the same order both constructors will produce the same
map.
The same commit changed "parent" from undefined to null. This caused a
failure in Buffer#slice() where it was checked if parent === undefined.
Causing the incorrect parent to be set.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
When calling write() after end() has been called on an OutgoingMessage,
an error is emitted and the write's callback is called with an instance
of Error.
Fix#7477.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Increase the performance of new Buffer construction by initializing all
properties before SetIndexedPropertiesToExternalArrayData call.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
When V8 started supporting Promises natively it also introduced a
microtack queue. This feature operates similar to process.nextTick(),
and created an issue where neither knew when the other had run. This
patch has nextTick() call the microtask queue runner at the end of
processing callbacks in the nextTickQueue.
Fixes: https://github.com/joyent/node/issues/7714
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Add a simple test to cover workers' implementation of
Worker.prototype.destroy(). Before adding this test, this code wouldn't
be covered by the tests suite, and any regression introduced in workers'
implementation of Worker.prototype.destroy wouldn't be caught.
Fixes: https://github.com/joyent/node/issues/8223
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Adding a compatibility section to node.exe embedded manifest so that
Node is declared explicitly compatible with Windows 8.1. Required so
that os.release() can return the correct version on Windows 8.1.
See http://msdn.microsoft.com/en-us/library/windows/desktop/ms724451(v=vs.85).aspx
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
* npm: Update to 1.4.28
* v8: fix a crash introduced by previous release (Fedor Indutny)
* configure: add --openssl-no-asm flag (Fedor Indutny)
* crypto: use domains for any callback-taking method (Chris Dickinson)
* http: do not send `0rnrn` in TE HEAD responses (Fedor Indutny)
* querystring: fix unescape override (Tristan Berger)
* url: Add support for RFC 3490 separators (Mathias Bynens)
Steven R. Loomis
Evan Rutledge Borden
Victor Widell
Steve Sharp
gyson
Yazhong Liu
Trevor Norris
Julien Gilli
Vladimir Kurchatkin
Gabriel Wicke
Julien Fontanet
Jackson Tian
Rasmus Christian Pedersen
James Ferguson
Fedor Indutny
cjihrig
Jicheng Li
Timothy J Fontaine
Patrick Mooney
Robert Kowalski
Kang-Hao Kenny
Andrew Teich
Mickael van der Beek
Alexis Campailla
Guilherme de Souza